Laser cutting Cor-ten

We laser cut Cor-Ten steel in thicknesses from 1.5mm – 20mm and 30mm can be supplied upon request.

Use the grade toggles below to learn the thicknesses we stock, order or are not available.

We stock in the following (mm).

1.5 2 2.5 3 4 5 6 8 10

12

Available to order (lead times vary – mm)

15 20 25 30

The average lead time for Cor-Ten can be up to 7-10 days depending on the thickness, please check with your Estimator for current lead times.

Cor-Ten is a brand of corten weathering steel that slowly oxidises up to a point and then requires practically no maintenance. This product turns dark orange, creating an attractive effect which is particularly popular in architecture and sculpture.

Corten steel is strong, formable, and weldable, developing a protective rust patina over time. Laser cutting ensures precise, high-volume production with fast turnaround. Cor-Ten A (cold-rolled) and Cor-Ten B (hot-rolled) offer extra corrosion resistance, toughness, and weldability for various applications.

Maximum Sizes

The maximum sheet size for most material thicknesses (1.5mm to 12mm) is available in 3000mm x 1500mm, a 10mm border is required around the outside, so the maximum part size we can cut is 2980mm x 1480mm.

15mm, 20mm, 25mm & 30mm are available upon request but on a smaller sheet size of 2500mmx1250mm.

Sheet sizes may differ subject to availability.

cor-ten

Laser cutting

We laser cut Cor-Ten steel in thicknesses from 1.5mm – 20mm.
30mm can be supplied upon request.

Corten

Corten steel is strong, formable, and weldable, developing a protective rust patina over time. Laser cutting ensures precise, high-volume production with fast turnaround. Cor-Ten A (cold-rolled) and Cor-Ten B (hot-rolled) offer extra corrosion resistance, toughness, and weldability for various applications.

laser cutting

Cor-Ten – weathering steel

Maximum Sizes

Cor-Ten is a brand of corten weathering steel that slowly oxidises up to a point and then requires practically no maintenance. This product turns dark orange, creating an attractive effect which is particularly popular in architecture and sculpture.

The maximum sheet size for most material thicknesses (1.5mm to 12mm) is available in 3000mm x 1500mm, a 10mm border is required around the outside, so the maximum part size we can cut is 2980mm x 1480mm.

25mm & 30mm are available upon request but on a smaller sheet size of 2500mm x 1250mm.

Sheet sizes may differ, subject to availability.

Use the grade toggles below to learn the thicknesses we stock, order or are not available.

Available to order (lead times vary – mm)

1.5 2 2.5 3 4 5 6 8 10

15 20

Enquire NowEnquire Now

Corten

The speed of the colour change will depend on the environment that it is subject to, the more frequently it is wet and dry and the greater the amount of sulphur in the atmosphere, the faster the distinctive weathered steel surface patina will develop.

Please note: patina only develops through repeated cycles of wetting and drying. If the surface remains constantly wet, this oxidation process cannot occur. Corten steel requires alternating exposure to moisture (which starts the oxidation) and dry periods (which allow the stable rust layer to form) to achieve its characteristic weathered appearance and corrosion resistance

Get fast quotes

We accept DXF, DWG and NC files. Please send information about which material, thickness and quantities you require.

Call our sales team on 01376 327 182

Corten

The speed of the colour change will depend on the environment that it is subject to, the more frequently it is wet and dry and the greater the amount of sulphur in the atmosphere, the faster the distinctive weathered steel surface patina will develop.

Please note: the patina will not develop if the surface is constantly wet.

Accurate price, reliable lead time, no hidden extras.

Fast Quotes

Open between 7.30am and 4.00pm we aim to answer every quote within one hour. Outside these hours we will respond the next working morning. We accept DXF, DWG and NC files, please send information about which material, thickness and quantities you require.

Call our sales team on 01376 327 182

Ready to quote?

Open between 7.30am and 4.00pm we aim to answer every quote within one hour. Outside these hours we will respond the next working morning. We accept DXF, DWG and NC files, please send information about which material, thickness and quantities you require.

Call our sales team on 01376 327 182