Professional Powder Coating Services for Laser Cut & Fabricated Components

Ready to start your next project?

Lasered Components & Eurotech Powder Coating Services

At Lasered Components, we provide a complete manufacturing solution from precision laser cutting and CNC bending through to high-quality powder coating and finishing. Working closely with Eurotech Powder Coating Services, located directly next door to our facility in Braintree, Essex, we offer a streamlined, efficient and reliable end-to-end service that takes your components from raw sheet metal to finished, coated parts without the complications of managing multiple suppliers.

Benefits of Powder Coating

The electrostatic application process ensures a uniform, consistent coating across the entire surface. This type of painting is a polymer, and cures as a hard plastic bonded to the metal it’s coating and ensures no drips or uneven build-up.

Powder coatings create a tough, scratch-resistant, and long-lasting finish that can withstand harsh environments and heavy use.

Powder coatings are available in a vast array of colours, finishes, and special effects, allowing for a high degree of customisation.

Powder coatings do not contain any solvents, making them a more environmentally friendly option compared to traditional liquid paints.

Powder coating is a relatively inexpensive finishing process, with lower material costs and reduced waste compared to other painting methods.

What This Means for Our Customers

  • Faster turnaround times due to close proximity between manufacturing and coating.

  • Reduced transport handling, lowering the risk of damage and delays.

  • Simplified project management with one coordinated solution.

  • Consistent quality control throughout production and finishing.

  • Efficient communication between fabrication and coating teams.

  • Supports both prototype and production volume requirements.

  • Newly installed powder coating robot offering consistent finishes.

  • Over 750 colours & finishes in stock.

  • ISO 9001 Certified & adhere to qualicoat standards.

Eurotech specialises in professional powder coating and metal finishing services for mild steel, stainless steel, aluminium, and fabricated components.

  • Surface preparation & shot blasting
  • Powder coating & wet spraying
  • Specialist finishes & colour matching

The result is a durable, high-quality finish that enhances both the appearance and performance of components.

Our Gallery

Lasered Components & Eurotech Powder Coating Services – Sample imagery

View Eurotec’s entire powder coating gallery here.

View all the Materials we laser cut & bend

Minimum & maximum thicknesses

To see the specific materials, grades, and thicknesses we stock and have available to order, please select the material from the toggles below. You can also download the full mateiral table as a PDF by clicking ‘View & download PDF’.

Laser cutting from 0.7 mm to 40 mm | bending up to 12mm – View mild steel page

Our most versatile and cost-effective laser cut material, available in grades S275, S355 and CR4. Suitable for structural, industrial and fabrication applications across a wide range of thicknesses from thin sheet to heavy plate up to 40mm | See full material information

Laser cutting from 0.5mm to 20 mm | bending up to 6mm – View aluminium page

A lightweight yet strong material laser cut across a range of grades with excellent precision. Ideal for aerospace, electronics, signage and architectural applications where weight reduction without sacrificing strength is essential. | See full material information

Laser cutting from 0.5mm to 25 mm | bending from 0.5mm to 8 mm – View stainless steel page

We laser cut stainless steel across all major grades and finishes including 304, 316 and 430, in a wide range of surface specifications:

  • 2B cold rolled and hot rolled
  • Grained / brushed one and two sides
  • Mirror polished one and two sides
  • Bright annealed and dull polished
  • Nirosta 4003 cold and hot rolled
  • 240S and 240S variants

 

Ideal for food processing, medical, marine, architectural and decorative applications where both precision and surface finish matter.

See full material information

Laser cutting from 0.5 mm to 5 mm | Bending from 0.5mm to 5mm – View galvanised steel page

Zinc-coated mild steel for corrosion protection

Galvanised steel combines the strength of mild steel with a protective zinc coating, making it the go-to choice for outdoor, construction and general fabrication applications where rust resistance is required without the cost of stainless

See full material information

Laser cutting from 0.7 mm to 3 mm | Bending from 0.7mm to 3mm – View zintec page

Thin zinc-coated cold-rolled steel

Zintec offers a consistent, paint-ready surface with mild corrosion resistance, making it the preferred choice for automotive panels, enclosures, electronics housings and any application requiring a clean painted finish

See full material information

Laser cutting from 3 mm to 25 mm – View Hardox page

Wear-resistant steel plate

Hardox is a premium abrasion-resistant steel used in the most demanding heavy industrial applications. We laser cut Hardox plate for skip lorries, plant machinery, mining equipment and any environment where standard steel would wear prematurely

See full material information

Laser cutting from 1.5 mm to 20 mm | Bending from 1.5mm to 12mm – View cor-ten page

Weathering steel with self-protecting patina

Cor-Ten develops a stable rust-like outer layer that acts as its own protective barrier, eliminating the need for paint or coatings. Widely specified by architects, sculptors and landscapers for outdoor features, cladding and signage.

See full material information

Laser cutting from 0.9mm to 5 mm | Bending from 0.9mm to 5 mm – View copper page

Copper is prized for its exceptional electrical and thermal conductivity, making it the material of choice for busbars, electrical components, heat exchangers and specialist engineering applications. We laser cut copper sheet with precision across all standard thicknesses.

See full material information | copper

Laser cutting from 0.9mm to 5 mm | Bending from 0.9mm to 5 mm – View brass page

Brass offers excellent machinability and a distinctive golden finish, making it ideal for decorative panels, signage, electronics components and precision engineering parts. We laser cut brass sheet to tight tolerances with clean, burr-free edges.

See full material information | Brass

Maximum Sheet Size: 3000mm x 1500mm*

Maximum part size: 2980mm x 1480mm*

*with some exceptions

View our full material availability table