mild Steel

Laser cutting & bending

We laser cut mild steel in thicknesses ranging between 0.7mm and 40mm & bend from 0.7mm to 12mm.

cR4

Cold Rolled Steel (CR/CRS) is a low-carbon steel known for its smooth finish, tight tolerances, and good formability. Although less suitable for structural loads, it’s widely used in furniture, appliances, and interior fittings due to its clean appearance and consistent performance.

S275JR

S275 is a low-carbon steel known for its excellent machinability, weldability, and formability. While it does not offer corrosion resistance, its strength and toughness make it well-suited for structural frameworks, automotive parts, and heavy equipment applications.

S355

S355 is a high-strength, low-alloy steel offering excellent weldability, formability, and toughness. Commonly certified to JR or J2 standards, it’s a preferred choice for bridges, offshore platforms, power stations, and heavy machinery components.

Laser cutting & bending mild Steel

Trusted manufacturer of mild steel laser cutting and bending. We laser cut steel sheet in thicknesses between 0.7mm and 40mm, and bend from 0.7mm to 3mm.

Laser Cutting

Minimum & Maximum thicknesses

By exploring the grade toggles below, you can easily discover which thicknesses we currently stock, which we can order specially, and which are not available for your projects. Additionally, this information will help you prepare accurate drawings for bending that match our material capabilities and ensure efficient production.

 

We stock in the following (mm).

0.7 0.9 1.2 1.5 2 2.5 3

We stock in the following (mm).

4 5 6 8 10

We stock in the following (mm).

3 12 15 20

We stock in the following (mm).

3 4 5 6 8 10 12 15 20

25      30       35       40

Available to order (lead times vary – mm)

4

We stock in the following (mm).

3 4 5 6 8 10 12 15 20

25      30       35       40

Bending

Minimum & Maximum thicknesses

0.7 mm to 3 mm

Enquire NowEnquire Now

Learn more about mild steel

Cold Rolled Steel (CR/CRS) is a low-carbon steel known for its smooth finish, tight tolerances, and good formability. Although less suitable for structural loads, it’s widely used in furniture, appliances, and interior fittings due to its clean appearance and consistent performance.

S275 is a low-carbon steel known for its excellent machinability, weldability, and formability. While it does not offer corrosion resistance, its strength and toughness make it well-suited for structural frameworks, automotive parts, and heavy equipment applications.

S355 is a high-strength, low-alloy steel offering excellent weldability, formability, and toughness. Commonly certified to JR or J2 standards, it’s a preferred choice for bridges, offshore platforms, power stations, and heavy machinery components.

Steel is primarily iron with low carbon content, making it strong, ductile, and resistant to breaking. Mild steel, like S275, S355, and CR4, is highly machinable, weldable, and ideal for structural and industrial applications.

Maximum Sizes

For larger dimensions such as 35mm and 40mm, our tolerances adhere to + / -0.50mm, fully aligning with established ISO guidelines. When preparing your drawings for bending, these tolerance specifications are crucial to ensure precise manufacturing.

Fundamentally, steel consists primarily of iron with low carbon content, which gives it exceptional strength, ductility, and resistance to breaking under stress. Moreover, mild steel varieties including S275, S355, and CR4 offer outstanding machinability and weldability, thereby making them ideal choices for both structural and industrial applications where precise bending is required.

Our mild steel laser cutting

Maximum Sizes

For larger dimensions such as 35mm and 40mm, our tolerances adhere to + / -0.50mm, fully aligning with established ISO guidelines. When preparing your drawings for bending, these tolerance specifications are crucial to ensure precise manufacturing.

Fundamentally, steel consists primarily of iron with low carbon content, which gives it exceptional strength, ductility, and resistance to breaking under stress. Moreover, mild steel varieties including S275, S355, and CR4 offer outstanding machinability and weldability, thereby making them ideal choices for both structural and industrial applications where precise bending is required.

The maximum sheet size for most materials is 3000mm x 1500mm, a 10mm border is required around the outside, so the maximum part size we can cut is 2980mm x 1480mm.

Laser cutting

Minimum & maximum thicknesses

Use the grade toggles below to learn the thicknesses we stock, order or are not available.

We stock in the following (mm).

0.7 0.9 1.2 1.5 2 2.5 3        

We stock in the following (mm).

4 5 6 8 10

We stock in the following (mm).

3 12 15 20

Available to order (lead times vary – mm)

4

We stock in the following (mm).

3 5 6 8 10 12 15 20 25

30            35           40

Bending

Minimum & maximum thicknesses

0.7 mm to 3mm

Sheet size we can cut is 2980 mm x 1480 mm.

Part size we can cut is 2980 mm x 1480 mm – with some exceptions.

Bending sheet size for Copper & Brass is 1980 mm x 980 mm

3 mm to 12 mm

Sheet size we can cut is 2980 mm x 1480 mm.

Part size we can cut is 2980 mm x 1480 mm – with some exceptions.

Bending sheet size for Copper & Brass is 1980 mm x 980 mm
Enquire NowEnquire Now

Mild steel from a trusted manufacturer

Through careful material selection, laser cut steel components constitute 81% by weight of all the components we produce. Furthermore, we steadfastly commit to sourcing only the highest quality materials for your projects. Additionally, all our stock remains safely stored indoors until required, thereby ensuring optimal condition when creating your components from drawings for bending.

Get fast quotes

We accept DXF, DWG and NC files. Please send information about which material, thickness and quantities you require.

Call our sales team on 01376 327 182

Mild steel from a trusted manufacturer

Through careful material selection, laser cut steel components constitute 81% by weight of all the components we produce. Furthermore, we steadfastly commit to sourcing only the highest quality materials for your projects. Additionally, all our stock remains safely stored indoors until required, thereby ensuring optimal condition when creating your components from drawings for bending.

Accurate price, reliable lead time, no hidden extras.

Fast Quotes

Open between 7.30am and 4.00pm we aim to answer every quote within one hour. Outside these hours we will respond the next working morning. We accept DXF, DWG and NC files, please send information about which material, thickness and quantities you require.

Call our sales team on 01376 327 182

Ready to quote?

When submitting your drawings for bending, please note we accept DXF, DWG and NC files, along with important details about your required material, thickness and quantities.

For immediate assistance, call our friendly sales team on 01376 327 182.